Brochure

1-800-752-2082
www.legendvalve.com
19
SPECIALTY BALL VALVES
T-1002CC Forged Brass Full Port Ball Valve with Cap & Chain
Traditional forged brass full port ball valve, 3/4” FNPT x 3/4” GHT.
Garden hose includes GHT cap with gasket and tethered to valve end.
*Capped GHT connection is rated 125 PSI.
• Saturated Steam (WSP): not recommended for steam applications.
• Cold Working Pressure (CWP): 600 PSI*
• Threaded end connections comply with ANSI/ASME B1.20.1
• Garden hose end connections comply with ANSI/ASME B1.20.7
• Cold Working Pressure (CWP): 600 PSI
• Threaded end connections comply with ANSI/ASME B1.20.1
T-2100 Forged Brass Full Port Three-Way Ball Valve
Traditional forged brass full port ball valve diverts media to the side-leg
connection from either run connection. Directional arrow on handle
indicates flowpath. Configurations and Sizes: FNPT x FNPT x FNPT,
1/4”- 2”.
The following Legend ball valves models are designed for special applications; such as, the simpler and labor saving connecting of piping
systems to boilers and tankless water heaters. Select models are constructed of no lead brass alloy for applications within a potable water
system. These valves are manufactured in ISO certified facilities, 100% pressure tested. The no lead ball valves are third party certified.
• Saturated Steam (WSP): 150 PSI
• Cold Working Pressure (CWP): 600 PSI
• Threaded end connections comply with ANSI/ASME B1.20.1
• Sweat end connections comply with ANSI/ASME B16.18
• Third party certied no lead ANSI/NSF 61-G, IAPMO.
T-2000MxSNL No Lead Forged Brass Full Port Ball Valve, MNPT x Sweat
No lead forged brass full port ball valve for transitioning from a
tank or boiler directly to copper tube. Configuration and Size:
MNPT x Sweat, 3/4” x 3/4”.