Brochure

1-800-752-2082
www.legendvalve.com
21
LegendPress™ press fitting end traditional forged brass full port ball
valve with flanged end connection for isolating circulator pumps.
Mounting holes are elongated to fit high velocity pumps. Standard flange
connection rotates for positioning valve. Configuration and Size: Press
Fitting x Flange, 3/4”, 1” and 1-1/4”.
• Saturated Steam (WSP): Not recommended for steam service.
• Cold Working Pressure (CWP): 600 PSI
P-2011 LegendPress™ Forged Brass Isolation Full Port Ball Valve
T/S-2011RFLG Forged Brass Isolation Full Port Ball Valve - Rotating Flange
Traditional forged brass full port ball valve with flanged end for isolating
circulator pumps. Standard flange connection rotates for positioning
valve. Mounting holes are elongated to fit high velocity pumps.
Configuration and Size: FNPT x Flange, Sweat x Flange, and 3/4”, 1”
and 1-1/4”.
• Saturated Steam (WSP): Not recommended for steam service.
• Cold Working Pressure (CWP): 600 PSI
• Threaded end connections comply with ANSI/ASME B1.20.1
• Sweat end connections comply with ANSI/ASME B16.18
• Saturated Steam (WSP): Not recommended for steam service.
• Cold Working Pressure (CWP): 600 PSI
• Threaded end connections comply with ANSI/ASME B1.20.1
• Sweat end connections comply with ANSI/ASME B16.18
• Garden hose end connections comply with ANSI/ASME B1.20.7
T/S-2012RFLG Forged Brass Isolation Full Port Ball Valve - Rotating Flange & Purge
Traditional forged brass full port ball valve with flanged end and integrated
drain valve for isolating circulator pumps. Standard flange connection
rotates for positioning valve. Mounting holes are elongated to fit high
velocity pumps. 1/4- turn tool activated drain valve with 3/4” GHT end and
tethered brass cap. Configuration and Size: FNPT x Flange, Sweat x Flange,
and 3/4”, 1” and 1-1/4”.