Brochure

1-800-752-2082
www.legendvalve.com
22
T/S-1004NL No Lead Forged Brass Full Port Cubic Ball Valve
Constructed of no lead binary brass. Available in sizes and configurations
1/2”- 2”, FNPT x FNPT and 1/2”- 2” Sweat x Sweat.
T/S-1004 Forged Brass Full Port Cubic Ball Valve
Forged body and end adapters are oversized. Large body with large
wrench flats. Available in sizes and configurations 1/2”- 4”, FNPT x FNPT
and 1/2”- 3” Sweat x Sweat.
• Saturated Steam (WSP): 150 PSI
• Cold Working Pressure (CWP): 600 PSI
• T-1004 CSA Certied for use with natural, manufactured, mixed, liquid petroleum, and
LP gas/air mixtures: 1/2 lb (1/2”- 2”); 2 lb and 5 lb (1/4”, 1/2”- 2”).
• T-1004 ANSI/ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 1”).
• T-1004 UL Listed 44R8 for LP, natural and manufactured gases; ammable liquids, #6
oil at 250° F (1/2”- 2”).
• T-1004 UL Listed 757X for re protection service (1/2”- 2”).
• T-1004 Factory Mutual approved for re protection service (1/2”- 2”).
• Third party certied no lead, ANSI/NSF 61-G, NSF
• Saturated Steam (WSP): 150 PSI
• Cold Working Pressure (CWP): 600 PSI
• T-1004NL CSA Certied for use with natural, manufactured, mixed, liquid
petroleum, and LP gas/air mixtures: 1/2 lb (1/2”- 2”); 2 lb and 5 lb (1/4”, 1/2”- 2”).
• T-1004NL ANSI/ASME B16.33 for use in gas piping systems up to 125 psig
(1/2”- 1”).
INDUSTRIAL FULL PORT BALL VALVES
Legend offers industrial ball valves for potable and non-potable water systems, process piping and pneumatics, including the T/S-1004 Cubic
Ball Valve. The T/S-1004 features a chrome plated forged brass cubic ball that has less surface area in contact with the seats. This minimizes
the friction between the ball and seats, reducing the operational torque to actuate by 20% and increases the seat life by 50%. The select
Legend industrial ball valves suitable for potable water systems are constructed of either no lead forging or casting brass. These valves are
manufactured in ISO certified facilities, 100% pressure tested. Each no lead model is third party certified.
T/S-901 Cast Bronze Full Port Ball Valve
Dezincification resistant bronze, heavy pattern body. Blow-out
proof stem, PTFE seats and packing gland. Available in sizes and
configurations 1/2”- 3”, FNPT x FNPT and 1/2”- 2”, Sweat x Sweat.
• Saturated Steam (WSP): 150 PSI
• Cold Working Pressure (CWP): 600 PSI
• Conforms to MSS Standard Practice 110
• Threaded end connections comply with ANSI/ASME B1.20.1
• Solder end connections comply with ANSI/ASME B16.18