Brochure

1-800-752-2082
www.legendvalve.com
23
T/S-901NL No Lead Cast Bronze Full Port Ball Valve
T-1500 Three Piece Cast Bronze Full Port Ball Valve
Large pattern three-piece cast bronze body and end adapters. Blow-out proof,
forged brass stem. Chrome plated cast brass ball. PTFE seats (2), end adapter
seals (2), stem seal, and stem packing. Packing nut is forged brass. Chrome
plated steel handle with vinyl sleeve. AISI 304 stainless steel bolts, split
washers and nuts (4 each).
No lead, dezincification resistant bronze, heavy pattern body. Blow-out proof
stem, PTFE seats and packing gland. Available in sizes and configurations
1/2”- 3”, FNPT x FNPT and 1/2”- 2”, Sweat x Sweat.
• Saturated Steam (WSP): 150 PSI
• Cold Working Pressure (CWP): 600 PSI
• Conforms to MSS Standard Practice 110
• Threaded end connections comply with ANSI/ASME B1.20.1
• Third party certied no lead, ANSI/NSF 61-G, NSF
• Saturated Steam (WSP): 150 PSI
• Cold Working Pressure (CWP): 600 PSI
• Conforms to MSS Standard Practice 110
• Threaded end connections comply with ANSI/ASME B1.20.1
• Solder end connections comply with ANSI/ASME B16.18
• Saturated Steam (WSP): 150 PSI
• Cold Working Pressure (CWP): 600 PSI (1/8”- 3/4”); 500 PSI (1”)
• Threaded end connections comply with ANSI/ASME B1.20.1
• CSA Certied for use with natural, manufactured, mixed, liquid petroleum,
and LP gas/air mixtures: ASME B16.44 up to 5 PSI, (1/2”- 1”).
• UL Listed 757X re protection service, (1/2”- 1”).
MINI-BALL VALVES
T-900MxF Forged Brass Large Port Ball Valve
Traditional forged brass mini-ball valve, with Dacromet® coated steel
handle has vinyl sleeve. Configurations and Sizes: MNPT x FNPT, 1/8”- 1”.
Mini-ball valves are commonly used to isolate gauges and as testing ports in a potable water piping system. They are also used in process
piping systems for a variety of applications. Legend mini-ball valves are constructed of both traditional and no lead brass/bronze alloys to
accommodate the many types of applications. Several models are also certified for use in gas piping systems. These valves are manufactured in
ISO certified facilities, 100% pressure tested.