Brochure

1-800-752-2082
www.legendvalve.com
31
T-3000 Blue Top One-Piece
Forged Brass Gas Ball Valve
Flare x MNPT (3/8”x 1/2” & 1/2”)
T-3000 Blue Top One-Piece
Forged Brass Gas Ball Valve
Flare x Flare (3/8”, 1/2”& 5/8”)
GAS BALL VALVES
Patented one-piece forged brass body eliminates the possibility of seam leaks that may occur to two-piece body designs. Top loaded chrome
plated brass ball. Gas ball valves are ideal for all residential and commercial gas installations. The chrome plated ball and nitrile rubber seats
resist contamination building up and offer a positive seal in low or moderate pressure gas applications. With a quarter-turn, ball-type, forged
brass design, it is more compact and superior to traditional cast bronze or cast iron gas cocks. The 175 PSI pressure rating permits high-
pressure air tests without the grease-seal, blowout common to plug-type gas cocks. Available in eight different configurations to meet most gas
connection applications. All gas ball valves are manufactured in a ISO certified facility, 100% pressure tested.
CSA Certified for use with natural, manufactured or mixed liquefied petroleum and LP gas/air mixtures:
• ANSI standard Z21.15 for use as a gas appliance connector valve for 1/2 lb. systems.
• CSA Certified 3-88 for use in 2 or 5 lb. house piping systems.
• Threaded end connections conform to ANSI/ASME B1.20.1
• Not suitable for steam service.
Massachusetts Commonwealth approved (Model T-3001). UL Listed 757X for the sizes 1/2” and 3/4” within the following categories:
• YQNZ.MH19347 Compressed Gas Shutoff Valves.
• YRBX.MH19347 Flammable Liquid Shutoff Valves.
• YRPV.MH19347 Gas Shutoff Valves.
• MHKZ.MH19347 Manual Valves.
• VQGU.EX4196 Valves, Trim and Drain.
T-3000 Blue Top One-Piece Gas
Forged Brass Ball Valve
FNPT x FNPT (3/8”, 1/2” & 3/4”)
T-3000 Blue Top One-Piece
Forged Brass Gas Ball Valve
Flare x FNPT (3/8” x 1/2”, 1/2”,
1/2” x 3/4”, 5/8” (15/16-16) x
1/2”, 5/8” (7/8-14) x 3/4”, 5/8”
(15/16-16) x 3/4”)
T-3000 Series One-Piece Gas Ball Valve