Brochure

1-800-752-2082
www.legendvalve.com
4
MAINTENANCE-FREE BALL VALVES
T/S-1001Ball Valve
The 1001 Series Full Port Ball Valves are Maintenance-Free because the stem seals with two Viton® O-rings instead of the traditional gland
follower or packing gland design. No call backs are necessary to tighten a packing nut. The bottom loaded stem is blowout proof and includes
a PTFE thrust washer that reduces friction and makes for easier actuation. The valve body, end adaptor and cavity ball are forged brass for
lighter weight and greater durability, resulting in less torque necessary to actuate the valve and longer life for the seats. The steel handle
is Dacromet® coated and will not corrode in aggressive environments. Every valve is manufactured to precise tolerances in a completely
automated ISO certified factory and 100% pressure tested. The 1001 Series of ball valves are offered in a variety of configurations for
residential, commercial and industrial applications. The T/S-1001 is constructed of UNS C37700 forged brass. The T/S-1001NL is constructed of
no lead binary brass alloy.
• Saturated Steam (WSP): 150 PSI
• Cold Working Pressure (CWP): 600 PSI (1/8”- 2”); 400 PSI (2-
1/2” to 4”).
• Conforms to MSS Standard Practice 110.
• Threaded end connections comply with ANSI/ASME B1.20.1
• Solder end connections comply with ANSI/ASME B16.18
1. Anti-corrosive Dacromet® Coated Handle
2. Tamper Evident Dacromet® Coated Nut
3. TFM
®
Anti-Friction Washer
4. Forged Brass Stem
5. Dual Viton
®
O-rings
6. Forged Brass End Adapter
7. Expansion Slot
8. TFM
®
Seat
9. One Piece Chrome Plated Forged Brass Cavity Ball
10. Forged Brass Body
Viton and Teflon are registered trademark of Dupont. Dacromet is a
registered trademark of Dacral. Dyneon TFM is a trademark of 3M.
2
3
4
5
6
7
8
9
10
1