Manualshelf

Brochure

ManualsBrandsLegend Valve ManualsHose BibbsT-537LNL 1/2" Forged Brass Ball Valve Hose Bibb w/ Lever Handle (Lead Free)
12345678910
1-800-752-2082
www.legendvalve.com
8
Forged traditional brass full port ball valve, bottom load blow-out proof stem
with PTFE packing gland and nut. Drain for maintenance and freeze protection.
Available in sizes and configurations 1/2”- 1”, FNPT x FNPT and 1/2”- 1”, Sweat
x Sweat.
Forged no lead brass full port ball valve, bottom load blow-out proof stem
with PTFE packing gland and nut. Drain for maintenance and freeze protection.
Constructed of no lead binary brass alloy. Does not require any additional steps
to solder, as compared to traditional brass valves. Suitable for potable water
applications. Available in sizes and configurations 1/2”- 1”, FNPT x FNPT and
1/2”- 1”, Sweat x Sweat.
T/S-1002 Forged Brass Full Port Ball Valve
T/S-1002NL No Lead Forged Brass Full Port Ball Valve
T/S-1102 Forged Brass Full Port Valve with Drain
T/S-1102NL No Lead Forged Brass Full Port Valve with Drain
Forged traditional brass full port ball valve, bottom load blow-out proof stem with
PTFE packing gland and nut. Available in sizes and configurations 1/4”- 3”, FNPT x
FNPT and 3/8”- 3”, Sweat x Sweat.
Forged no lead brass full port ball valve, bottom load blow-out proof stem with PTFE
packing gland and nut. Constructed of no lead binary brass alloy. Suitable for potable
water applications. Does not require any additional steps to solder, as compared to
traditional brass valves. Available in sizes and configurations 1/4”- 3”, FNPT x FNPT
and 3/8”- 3”, Sweat x Sweat.
•  T-1002 CSA Certied for use with natural, manufactured, mixed, liquid petroleum, 
and LP gas/air mixtures: 1/2 lb (1/2”- 2”); 2 lb and 5 lb (1/2”- 2”).
•  T-1002 ANSI/ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 2”).
•           T-1002 UL Listed 44R8 for LP, natural and manufactured gases; ammable liquids, #6 
oil at 250 deg. F ( 1/2”- 2”).
• T-1002 Factory Mutual approved for re protection service (1/2”- 2”).
•  Third party certied no lead ANSI/NSF 61-G, Truesdail.
•  T-1002NL CSA Certied for use with natural, manufactured, mixed, liquid petroleum, 
and LP gas/air mixtures: 1/2 lb (1/2”- 2”); 2 lb and 5 lb (1/2”- 2”).
•  T-1002NL ANSI/ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 2”).
•  T-1002NL UL Listed 44R8 for LP, natural and manufactured gases; ammable liquids, #6 
oil at 250 deg. F ( 1/2”- 2”).
• T-1002NL Factory Mutual approved for re protection service (1/2”- 2”).
•  Saturated Steam (WSP): not suitable for steam applications.
• Cold Working Pressure (CWP): 600 PSI.
•  Third party certied no lead ANSI/NSF 61-G, Truesdail.
• Saturated Steam (WSP): not suitable for steam applications.
• Cold Working Pressure (CWP): 600 PSI.