Brochure

Part No. Qty.
112
MANIFOLDS
Circuit Actuator
ISO 9002
4-Wire Circuit Actuator – For M-8000, M-8100 and M-8200 series manifolds. 24 volt AC actuator
with 36” leads. Includes end switch that closes when valve is fully open.
800-200 4-Wire Circuit Actuator with End Switch 1
Manifold Union
ISO 9002
Manifold Union – Connects any two M-8200 series manifolds to increase circuit capacity.
800-815 1” Brass – Pair 1
800-816 1-1/4” Brass – Pair 1
End Plug with Gasket
ISO 9002
Brass Manifold End Plug – With EPDM O-ring. Used on all M-8000 and M-8200 series manifolds to
close and seal manifold end.
800-845 1” Manifold End Plug 1
800-846 1-1/4” Manifold End Plug 1
Port Cap
ISO 9002
Manifold Port Cap – Used to close and seal unused ports on M-8000, M-8100 and M-8200
manifolds. Includes EPDM O-ring.
800-141 Manifold Port Cap 1
PEX Tube Connector
ISO 9002
PEX Tube Connectors – For M-8000 and M-8200 series manifolds. (Not for use with
PEX-AL-PEX tube).
800-140 5/16” PEX to Manifold Connector - Pair 1
800-142 3/8” PEX to Manifold Connector - Pair 1
800-143 1/2” PEX to Manifold Connector - Pair 1
800-144 5/8” PEX to Manifold Connector - Pair 1
800-145 3/4” PEX to Manifold Connector - Pair 1
M-8200 PRECISION™ ACCESSORIES
3/4” connector