Brochure

Part No. Size Configuration Model No. Qty. Case
91
RADIANT PANEL SYSTEM
Effective Date:
October 2018
Phone: [phone]
www.legendvalve.com
Tube Holding Pins
Heavy duty tube holder pins
800-345 1-1/2" long for panels
1” or thicker
Holding Pins 100 Bag
800-348 2" long for panels
1-1/2" or thicker
Holding Pins 100 Bag
Tube Bend Support
Tube bend support 90°
Holds tube in a tight radius 90° bend without a tting elbow and without fear of “kinking.” Slide support easily
around 1/2” tube while straight, then make bend by clicking tabs together.
800-503 For 1/2" tubing Tube Support 1 -
Tube Bend Support
Tube bend support 90°
Used to hold exible tubing in a 90˚ bend without a tting elbow and creates a neat, professional appearance.
800-305 Fits up to 1/2” tubing Bend Support 1 -
800-304 Fits up to 3/4” tubing Bend Support 1 -
Protection Sleeve
Tube protection sleeve
Used to protect tubing in a concrete slab at expansion joints. Pre-slit 12” lengths allow for rapid installation after
tubing has been installed and before concrete pour.
800-313 12" long Fits 1/2" tubing Sleeve 1 -
800-314 12" long Fits 3/4" tubing Sleeve 1 -
Heat Transfer Plate
Joist space
Extruded Aluminum Heat Transfer Plates – For use in radiant oor heating via joist space applications (under
sub-oor) with 3/8” or 1/2” PEX tubing. Plates are 3-1/2” x 4’ long and pre-drilled for wood screws to attach
underneath sub-oor. PEX tubing is held securely in tube channel on under side of plate.
800-362 3-1/2" x 4' long Fits 3/8" tubing Transfer Plate 1 20
800-364 3-1/2" x 4' long Fits 1/2" tubing Transfer Plate 1 20
TUBING INSTALLATION ACCESSORIES