Brochure

Part No. Size Configuration Model No. Qty. Case
92
RADIANT PANEL SYSTEM
TUBING INSTALLATION ACCESSORIES
Tube Track
Tube Track & Tube Track Duo – Used to hold tubing to rigid foam, wood or concrete. Mounting holes are provided
for appropriate fasteners. Clips at end of each piece allow 3-1/4’ (39”) sections to snap together. Use tube
holding pins in rigid foam board installations.
800-323 39” Length
Tube track holding tabs
for 3/8” or 1/2” tubing
are spaced every 2”
1 -
800-324 39” Length
Dual track holding tabs
for 3/8” or 1/2” and
for 5/8” or 3/4” tubing
alternate every 4"
1 -
Mounting Rail
Use tube holding pins (top) in rigid foam
board installations
Tube Mounting Rail – Used to hold tubing to rigid foam, wood or concrete. Mounting holes are provided for
appropriate fasteners. 6-1/2’ (78”) rails have prescored “break” lines should shorter lengths be needed. Holding
slots are spaced every 2
”.
800-333 78” Length Fits 1/2" tubing 1 -
800-334 78” Length Fits 3/4" tubing 1 -
Tube Bend Support, Plastic
Bend support made from durable plastic with nail tab for securing to studs or joists when routing plastic tubing
in plumbing installations. For 1/2", 3/4" and 1" tubing.
509-003 1/2"
Plastic Bend Support
with Nail Tab
1 -
509-004 3/4"
Plastic Bend Support
with Nail Tab
1 -
509-005 1"
Plastic Bend Support
with Nail Tab
1 -
Tube Bend Support, Metal
Metal bend support for 1/2", 3/4" and 1" exible plastic tubing.
509-013 1/2" Metal Bend Support 1 -
509-014 3/4" Metal Bend Support 1 -
509-023 1/2" Metal Bend Support
with Nail Flange
1 -