Specification Sheet

W
ith three-mode surge suppression
up to 210 joules and thermal
protection, these receptacles
provide a superior choice for protecting sensitive
electronics. The construction is extra rugged —
but installation is a snap, thanks to an auto-
ground clip plus screw-pressure-plate back wiring
on all terminals (they also permit side wiring).
All feature an LED indicator and audible alarm
(which can be turned On or Off) to warn of
MOV damage.
5262-SP, 5362-SP
Dependable protection
plus durable construction.
Features & Benefits
Field Uses/Vertical Markets
■
Education
■
Institutional
■
Retail
■
Office
■
Hospitality/Lodging
■
Multiple Dwelling
SF1304R1 — Updated January 2004 — For latest specs visit www.legrand.us/passandseymour
TVSS & Isolated Ground Devices
Heavy-Duty TVSS
15 & 20A, 125VAC
Thermal protection in 3 modes. 3 18mm
dual pack MOVs absorb up to 210 Joules
of excess energy in each leg (L-N, L-G, N-G) with
13,000 amp current handling capability for full,
equal and symmetrical protection. With 150V
rating, each MOV is less susceptible to common
spikes that degrade 130V varistors. Protection
response time in less than one nanosecond.
Wave-soldered circuit board
encapsulated in epoxy
provides superior
electrical, mechanical, and thermal stability.
Audible alarm alert of
MOV damage. Alarm able
to be turned On/Off.
Solid-state LED monitor
has 25-year minimum life
expectancy.
A high visibility,
wide-angle lens indicates
protection is in place.
Wrap-around steel strap for structural
integrity. Auto-ground is standard, for easier
installation.
External screw-pressure-plate back
and side wire terminals including
ground with external back wire
clamps (exclusive)
accept #14 – #10
AWG copper or copper-clad, solid or
stranded conductors. External pressure
plate feature allows two conductors to
be terminated by a single screw.
Impact-resistant
thermoplastic exterior
resists impacts and scrape.
Triple-wipe, copper-alloy
contacts
for superior, more
dependable connection.
5362-REDSP