Owner's Manual
Table Of Contents
- Instruction Manual
- FOREWORD
- SCOPE OF DELIVERY
- REPLACEMENT PARTS/ACCESSORIES
- LEGAL INFORMATION
- SAFETY REMARKS
- GENERAL INFORMATION
- WARRANTY
- TABLE OF CONTENT
- PART DESIGNATIONS
- DISPLAYS
- PREPARATION
- CAMERA OPERATION
- CAMERA BASIC SETTINGS
- BASIC SHOOTING/RECORDING SETTINGS (PICTURE & VIDEO)
- BASIC SHOOTING SETTINGS (PICTURE)
- BASIC RECORDING SETTINGS (VIDEO)
- PICTURE MODE
- DRIVE MODE
- FOCUSING
- ISO SENSITIVITY
- WHITE BALANCE
- EXPOSURE
- SHOOTING MODES
- FLASH PHOTOGRAPHY
- VIDEO MODE
- REVIEW/PLAYBACK MODE
- CONTROL ELEMENTS IN REVIEW/PLAYBACK MODE
- INITIATE/EXIT REVIEW/PLAYBACK MODE
- SELECTING/SCROLLING THROUGH RECORDINGS
- INFO DISPLAYS IN REVIEW/PLAYBACK MODE
- CROPPED SECTION ZOOM
- DISPLAYING MULTIPLE RECORDINGS AT ONCE
- TAGGING/RATING OF RECORDINGS
- DELETING RECORDINGS
- PREVIEW OF LATEST RECORDING
- SLIDE SHOW
- VIDEO PLAYBACK
- OTHER FUNCTIONS
- LEICA FOTOS
- CARE/STORAGE
- FAQ
- MENU OVERVIEW
- INDEX
- TECHNICAL DATA
- LEICA CUSTOMER CARE
- LEICA ACADEMY
- Quick Start Guide
- Product Info
EN
Basic recording settings (video)
107
VIDEO AUXILIARY DISPLAYS
ASPECT RATIO DISPLAY
The actually recorded aspect ratio depends on the set resolution
(see p.100). It is possible, however, to have colored auxiliary lines
displayed to show other aspect ratios (e.g. 4:3). Multiple auxiliary
lines can be displayed at the same time. No auxiliary lines are
displayed in factory settings.
▸ Select Video Aspect RatioVideo Aspect Ratio in the main menu
▸ Select the desired setting
(1.33:1 (4:3)1.33:1 (4:3), 1.66:1 (5:3)1.66:1 (5:3), 1.78:1 (16:9)1.78:1 (16:9), 1.85:1 (37:20)1.85:1 (37:20), 2.35:12.35:1, 2.40:12.40:1)
▸ Select OnOn/OffOff
Notes
• The format limits of a wider aspect ratio (than that of the
recorded video) are indicated by horizontal green lines, those of
a narrower one by vertical red lines.
• The auxiliary lines are labeled with the relevant aspect ratio.
SAFETY AREA
Depending on the playback device used, a small area of the image
borders may be invisible. It is therefore possible to display a “safety
area” in a configurable width. The image is displayed with a
relevantly proportioned frame around the desired image section.
Multiple safety area frames can be displayed at the same time. No
safety area frames are displayed in factory settings.
▸ Select Video Safety AreaVideo Safety Area in the main menu
▸ Select the desired setting
(80%80%, 90%90%, 92.5%92.5%, 95%95%)
▸ Select OnOn/OffOff