Owner's Manual

EN
Picture Mode
121
DISTANCE DISPLAY
Distance information is shown in the top display during manual
focusing.
– Focus Mode MF: when the shutter button is pressed to the first
pressure point
– Focus Mode AF: when the shutter button is pressed and held at
the first pressure point, followed by a turning of the focus ring
The unit of measure (mm or ftft) can be selected, see p.73.
Note
• The focus distance is estimated based on the focus position
transmitted by the lens.
USING AUTOFOCUS IN MF MODE
The joystick can be used as needed for automatic focusing. The AF
modes AFs and AFc are available.
You can also concurrently carry out exposure metering and save
the resulting value (see p.134).
▸ Select Customize ControlCustomize Control in the main menu
▸ Select JoystickJoystick
▸ Select MF ModeMF Mode
▸ Select the desired setting
(AFsAFs, AFs + AE-LAFs + AE-L, AFcAFc, AFc + AE-LAFc + AE-L)
The metering functions are distributed as follows while the joystick
is pressed and held:
Menu settings Joystick Shutter button
AFs + AE-LAFs + AE-L
AFc + AE-LAFc + AE-L
Exposure and focus –
AFsAFs
AFcAFc
Sharpness Exposure
▸ Aim at the object
▸ Press and hold the joystick
• The measurement is taken and saved.
▸ Store more measurements via the shutter button as needed
▸ Select the final image section
▸ Shutter release