Owner's Manual
Table Of Contents
- Instruction Manual
- FOREWORD
- SCOPE OF DELIVERY
- REPLACEMENT PARTS/ACCESSORIES
- LEGAL INFORMATION
- SAFETY REMARKS
- GENERAL INFORMATION
- WARRANTY
- TABLE OF CONTENT
- PART DESIGNATIONS
- DISPLAYS
- PREPARATION
- CAMERA OPERATION
- CAMERA BASIC SETTINGS
- BASIC SHOOTING/RECORDING SETTINGS (PICTURE & VIDEO)
- BASIC SHOOTING SETTINGS (PICTURE)
- BASIC RECORDING SETTINGS (VIDEO)
- PICTURE MODE
- DRIVE MODE
- FOCUSING
- ISO SENSITIVITY
- WHITE BALANCE
- EXPOSURE
- SHOOTING MODES
- FLASH PHOTOGRAPHY
- VIDEO MODE
- REVIEW/PLAYBACK MODE
- CONTROL ELEMENTS IN REVIEW/PLAYBACK MODE
- INITIATE/EXIT REVIEW/PLAYBACK MODE
- SELECTING/SCROLLING THROUGH RECORDINGS
- INFO DISPLAYS IN REVIEW/PLAYBACK MODE
- CROPPED SECTION ZOOM
- DISPLAYING MULTIPLE RECORDINGS AT ONCE
- TAGGING/RATING OF RECORDINGS
- DELETING RECORDINGS
- PREVIEW OF LATEST RECORDING
- SLIDE SHOW
- VIDEO PLAYBACK
- OTHER FUNCTIONS
- LEICA FOTOS
- CARE/STORAGE
- FAQ
- MENU OVERVIEW
- INDEX
- TECHNICAL DATA
- LEICA CUSTOMER CARE
- LEICA ACADEMY
- Quick Start Guide
- Product Info
Picture Mode
EN
122
ISO SENSITIVITY
The ISO setting covers a range between ISO 50 and ISO 100 000,
allowing you to adapt to the relevant situation as required.
There is more leeway for the use of preferred shutter speed and
aperture combinations when setting the exposure manually. You
can set priorities within the scope of the automatic setting, e.g. for
reasons of picture composition.
Factory setting: Auto ISOAuto ISO
FIXED ISO VALUES
Values between ISO 50 and ISO 100 000 can be selected in 12
increments.
▸ Select ISOISO in the main menu
▸ Select the desired value
Note
• When high ISO values are used or the image is edited later,
image noise, as well as vertical and horizontal stripes may
become visible, particularly in larger, evenly lit areas of the
object.
AUTOMATIC SETTING
The camera automatically adjusts the sensitivity to ambient
brightness and/or to the configured shutter speed/aperture
settings combination. In conjunction with aperture priority mode,
this function extends the range for automatic exposure control.
▸ Select ISOISO in the main menu
▸ Select Auto ISOAuto ISO
LIMITING SETTING RANGES
A max. ISO value can be set, which will then limit the automatic
setting range (Maximum ISOMaximum ISO). A max. exposure time can also
optionally be configured. There are automatic settings and fixed
max. shutter speeds 1/21/2s and 1/20001/2000s available for that purpose.
Separate settings are available for flash photography.
LIMITING ISO VALUES
All values from ISO 100 are available.
Factory setting: 64006400
▸ Select Auto ISO SettingsAuto ISO Settings in the main menu
▸ Select Maximum ISOMaximum ISO
▸ Select the desired value