Owner's Manual

Picture Mode
EN
138
SHOOTING MODES
SERIAL SHOOTING
The camera is set to single shot by default (SingleSingle). Serial shooting
can also be created to e.g. capture motion sequences at various
stages.
▸ Select Drive ModeDrive Mode in the main menu
▸ Select the desired setting
(Continuous - Low SpeedContinuous - Low Speed, Continuous - Medium SpeedContinuous - Medium Speed,
Continuous - High SpeedContinuous - High Speed, Continuous - Very High SpeedContinuous - Very High Speed)
Once you have finalized your settings, the camera will take serial
exposures as long as you keep the shutter button pressed down
fully (and you have sufficient space on your memory card).
Notes
• We recommend deactivating the preview review mode
(Auto ReviewAuto Review) when using this function.
• The specified picture sequence stated in the technical
information refers to a default setting (ISO 200ISO 200, JPG format L-JPGL-JPG).
The picture sequence may differ in conjunction with other
settings or depending on the picture content, White BalanceWhite Balance
setting and the memory card used.
• Regardless of how many pictures were taken in a series, the last
picture in the series or the last picture saved on the memory
card while the save process is ongoing will be displayed first in
both review modes.
• Serial exposures are not possible if a flash is used. Only a single
picture will be taken if the flash function is activated.
• Serial exposures are not available in combination with the
self-timer function.
• The buffer memory of the camera only allows a limited number
of exposures in series and in the selected exposure frequency.
The exposure frequency is reduced, once the capacity limit of
the camera's buffer memory is reached. This slow-down is due
to the time required to transfer the data from the buffer memory
to the card. The remaining number of exposures is displayed at
the bottom right.
• Continuous - Low SpeedContinuous - Low Speed/Continuous - Medium SpeedContinuous - Medium Speed:
For the modes AFsAFs, AFcAFc and MFMF, the exposure and white balance
settings are done individually for every shooting. Focusing is
done additionally in the modes AFsAFs and AFcAFc.
• Continuous - High SpeedContinuous - High Speed/Continuous -Very High SpeedContinuous -Very High Speed:
In the modes AFsAFs, AFcAFc and MFMF the exposure, focus and white
balance settings specified for the first shooting will be applied to
all subsequent shootings.