Owner's Manual

EN
Picture Mode
143
Notes
• A multi shot shooting will not be created if motion artefacts
correction fails. The "standard" DNG recording will, however,
remain intact.
• A deactivation of the motion artefacts correction can further
improve image sharpness for completely immobile objects.
• This function is not available in conjunction with APS-C lenses
and in some cases with some lenses attached via adapter.
• The following limitations apply when using Multi-ShotMulti-Shot: Exposure
time ≤ 1s, exposure value ≤ F16, ISO value ≤ 3200.
• The electronic shutter function is always used for multi shot
shooting. The multi shot function remains deactivated when the
Shutter TypeShutter Type is set to MechanicalMechanical.
• Multi shot shooting are not possible if a flash is used.
• The multi shot function creates very large image files. Sufficient
storage space on the memory card is essential.
• The message Vibration detectedVibration detected appears in the display if the cam-
era-internal sensors detect movement.
Ensure a robust, level surface.Ensure a robust, level surface.
SELF-TIMER
The self-timer function allows taking pictures with a preset time
delay. We recommend that the camera is placed on a tripod.
▸ Select Drive ModeDrive Mode in the main menu
▸ Select Self Timer 2 sSelf Timer 2 s/Self Timer 12 sSelf Timer 12 s
▸ Shutter release
• The remaining time until exposure is counted down on screen.
The self-timer LED at the front of the camera counts down the
delay time. It flashes slowly during the first 10s, then fast for
the last 2s.
• The self-timer delay time can be canceled at any time by
taping the shutter button; the relevant settings remain intact.
Notes
• Exposure metering is done first; in autofocus mode, focusing is
first. Only then will the delay time commence.
• The self-timer function is only available for individual shootings.
• The function remains active until another function is selected in
the Drive ModeDrive Mode submenu.