Owner's Manual
Table Of Contents
- Instruction Manual
- FOREWORD
- SCOPE OF DELIVERY
- REPLACEMENT PARTS/ACCESSORIES
- LEGAL INFORMATION
- SAFETY REMARKS
- GENERAL INFORMATION
- WARRANTY
- TABLE OF CONTENT
- PART DESIGNATIONS
- DISPLAYS
- PREPARATION
- CAMERA OPERATION
- CAMERA BASIC SETTINGS
- BASIC SHOOTING/RECORDING SETTINGS (PICTURE & VIDEO)
- BASIC SHOOTING SETTINGS (PICTURE)
- BASIC RECORDING SETTINGS (VIDEO)
- PICTURE MODE
- DRIVE MODE
- FOCUSING
- ISO SENSITIVITY
- WHITE BALANCE
- EXPOSURE
- SHOOTING MODES
- FLASH PHOTOGRAPHY
- VIDEO MODE
- REVIEW/PLAYBACK MODE
- CONTROL ELEMENTS IN REVIEW/PLAYBACK MODE
- INITIATE/EXIT REVIEW/PLAYBACK MODE
- SELECTING/SCROLLING THROUGH RECORDINGS
- INFO DISPLAYS IN REVIEW/PLAYBACK MODE
- CROPPED SECTION ZOOM
- DISPLAYING MULTIPLE RECORDINGS AT ONCE
- TAGGING/RATING OF RECORDINGS
- DELETING RECORDINGS
- PREVIEW OF LATEST RECORDING
- SLIDE SHOW
- VIDEO PLAYBACK
- OTHER FUNCTIONS
- LEICA FOTOS
- CARE/STORAGE
- FAQ
- MENU OVERVIEW
- INDEX
- TECHNICAL DATA
- LEICA CUSTOMER CARE
- LEICA ACADEMY
- Quick Start Guide
- Product Info
EN
Picture Mode
145
ATTACHING THE FLASH UNIT
▸ Switch off the camera and flash unit
▸ Slide the foot of the flash unit all the way into the accessory
shoe and use the clamping nut (where available) to secure it
against accidental movement
• Movement inside the accessory shoe can interrupt required
contacts and therefore cause malfunctions.
DETACHING THE FLASH UNIT
▸ Switch off the camera and flash unit
▸ Detaching the flash unit
FLASH EXPOSURE METERING (TTL METERING)
The camera offers a fully automated, camera-controlled flash mode
in conjunction with system-compatible flash units (see p. 144)
and for the auto modes aperture priority and manual setting.
In aperture priority mode and with manual setting, the camera
furthermore allows the use of other interesting flash techniques
like flash synchronization and firing with slower shutter speeds than
the max. sync time.
The camera additionally communicates the sensitivity setting to the
flash unit. The flash unit can use this information to automatically
adjust its range data, provided the device comes with these
displays and the aperture setting selected on the lens is also
entered manually on the flash unit. The ISO sensitivity setting
cannot be altered via the flash unit on system-compatible units,
because the information is received from the camera.