Owner's Manual

EN
Other functions
195
Notes
• When using memory cards that were not formatted with this
camera, the file numbering will begin with 0001 again. Should
the memory card already contain a file with a higher number,
then numbering will be continued from that number.
• A relevant message will be displayed on the LCD panel once
folder number 999 and file number 9999 are reached, and all
numbering must be reset.
• Format the memory card and reset the picture number right
after to reset the folder number to 100.
EDIT FILE NAMES
▸ Select Camera SettingsCamera Settings in the main menu
▸ Select Edit File NamesEdit File Names
• A keyboard submenu is displayed.
• The input line contains the factory setting “L” as the first letter
of the file name. Only this letter can be changed.
▸ Enter a letter of your choice (see p. 62)
▸ Confirm
Notes
• The change to a file name applies to all subsequent pictures or
until a new change is made. The sequential number will not be
affected; but it will be reset when a new folder is created.
• During a reset to factory settings, the first letter will always be
reset to “L”.
• Lower case letters are unavailable.