Owner's Manual

Other functions
EN
200
Notes
• The camera must not be switched off before the update is
completed.
• The message Insufficient batteryInsufficient battery Update not possibleUpdate not possible will appear if
the battery is not sufficiently charged. Recharge the battery and
then repeat the process described above.
• Data & time, as well as the preferred language will have to be set
up again after the restart. Relevant prompts will appear on
screen.
• You will find additional device and country-specific registration
marks and numbers in the Camera InformationCamera Information submenu.
UPDATING THE LENS FIRMWARE
Where available, you can optionally carry out firmware updates for
lenses. The instructions provided for camera firmware updates
apply.
▸ Download the latest firmware version
▸ Save the download to the memory card
▸ Insert the memory card into the camera
▸ Switching the camera on
▸ Select Camera InformationCamera Information in the main menu
▸ Select Lens Firmware VersionLens Firmware Version
▸ Select Start UpdateStart Update
▸ Select YesYes
UPDATING THE ADAPTER FIRMWARE
Where available, you can optionally carry out firmware updates for
adapters. The instructions provided for camera firmware updates
apply.
▸ Download the latest firmware version
▸ Save the download to the memory card
▸ Insert the memory card into the camera
▸ Switching the camera on
▸ Select Camera InformationCamera Information in the main menu
▸ Select Adaptor Firmware VersionAdaptor Firmware Version
▸ Select Start UpdateStart Update
▸ Select YesYes
Note
• The relevant menu item will only be visible if an adapter is
mopunted and activ.