Owner's Manual

Basic shooting/recording settings (picture & video)
EN
80
BASIC SHOOTING/RECORDING SETTINGS
(PICTURE & VIDEO)
The settings described in this chapter apply for picture and video
mode alike. They are therefore available in the picture and video
menu (see chapter “Camera Operation” under “Menu Control”). A
setting selected in one of the modes will also apply to the other.
TOUCH AF
Touch AF allows a direct placement of the AF metering field.
Factory setting: OnOn
▸ Select Camera SettingsCamera Settings in the main menu
▸ Select Touch AFTouch AF
▸ Select OnOn/OffOff
Positioning the AF Metering Field
▸ Briefly tap the LCD panel in the desired position
1/80002.8F 12500ISO EV
-3 2 1 0 21 3+
823412MP
To move the metering field back to the center of the screen
▸ Double tap the LCD panel
Notes
• This function is available in conjunction with the following AF
metering methods: SpotSpot, FieldField, ZoneZone, TrackingTracking and
Face/Body DetectionFace/Body Detection.
• With SpotSpot, FieldField, ZoneZone or Face/Body DetectionFace/Body Detection metering selected,
the camera will immediately focus again automatically. If the
metering method TrackingTracking is selected, the metering field will
remain at the selected position and autofocus commences when
the shutter button is tapped.
TOUCH AF IN EVF MODE
Touch AF is deactivated by default when EVF is in use to prevent
any inadvertent altering of the AF metering field. Touch AF can,
however, also be used in EVF mode.
Factory setting: OffOff
▸ Select Camera SettingsCamera Settings in the main menu
▸ Select Touch AF in EVFTouch AF in EVF
▸ Select OnOn/OffOff