Owner's Manual
Table Of Contents
- Instructions
- Contents
- Designation of parts
- Foreword
- Package contents
- Disposal of electrical and electronic equipment
- Potential applications
- Attaching the carrying strap and the eyepiece cover
- Attaching the lens covers
- Inserting and replacing the battery
- Battery charge level
- Adjusting the eyepiece cups / Using with and without glasses
- Adjusting the eye spacing
- Setting the focus / Diopter compensation
- Distance metering
- Equivalent horizontal range (EHr)
- Scan mode
- Measurement range and accuracy
- Maintenance / cleaning
- Accessories
- Spare parts
- Troubleshooting
- Technical data
- Leica Product Support
- Leica Customer Care
- Product Info
20
INSERTING AND CHANGING THE BATTERY
The Leica Geovid R binoculars are powered by a
3 Volt lithium round cell (e.g. Duracell DL CR2,
Ucar CR2, Varta CR2 or other CR2 types).
1. Open the cover (10) over the battery
compartment (9) by turning it anticlockwise,
e.g. with a coin.
2. Insert the battery so that the positive contact
goes in first (as shown by the markings in the
battery compartment).
3. Close the cover again by turning it clockwise.
Notes:
• Batteries should be stored in a cool dry place.
• If the binoculars are not going to be used for a
long time, the battery should be removed.
Caution:
• Batteries should never be put in a fire, heated,
recharged, taken to pieces or broken apart.
• Used batteries may not be disposed of as
normal, household waste as they contain toxic
materials that are harmful to the environment.
To ensure that they are properly recycled, they
should be returned to the dealer or disposed of
as special waste (at a collection point).