Operating Instructions

Additionally (and only) for exposure mode P and
when pressing shutter release to pressure point
o. The automatically controlled shutter speed
and aperture values
Additionally (and only) for exposure modes
A and
T and when pressing shutter release to pressure
point
p. The manually set shutter speed (for
A) and
aperture values (for
T). The yellow arrows to
the right and left next to the numbers show
the possible adjustment directions: up
and/or down for aperture priority mode for
larger or smaller aperture values, and left
and/or right for speed priority mode for
faster or slower shutter speeds.
Additionally (and only) for exposure mode
M and
when pressing shutter release to pressure point
q. The manually set shutter speed and aperture
values and the light balance
After a picture has been taken and during video
recordings
r. Flashing red dot
If sound recording is set
s. Corresponding symbol
In video recording mode, only the displays a, b, c,
f, g, r and s appear. During video recording a and
q flash.
2. Monitor screen without function displays
3. Monitor screen off (not possible if digital zoom
is activated)
The displays in review mode
1. Monitor screen with function displays
a.
j for review mode
b. Resolution
c. Image data compression rate
d. Battery charge level
e. Picture number/total number of
pictures/folder number/picture number in
appropriate folder
f. Picture date and time
2. Monitor screen with expanded function displays
In addition to displays a to e and k:
g. Exposure metering method
h. Exposure
i. Shutter speed
j. ISO sensitivity
k. Flash mode
l. White balance setting (not when set to
AUTO)
3. Monitor screen without function displays
Notes:
The functions/modes you have set are only
retained when you turn the camera off and back
on in record (
REC) modes.
If the digital zoom function (
i D. ZOOM, see
p. 126) is set, the monitor screen cannot be
turned off.
If immediate review of pictures is turned on
(
o AUTO REVIEW, see p.129), the monitor
screen appears – briefly, approx. 2s – even if the
monitor is turned off. It then goes off again.
After a picture has been taken and the review and
input confirmation button (
VIEW/SET, 1.31) has
been pressed, the monitor screen appears even if
the monitor is turned off. However, it goes off
again after a short time (see p. 129).
If the menu system is activated, the monitor can-
not be turned off.
Detailed guide / The most important settings/controls / 121