Operating Instructions

Detailed guide / Record mode / 129
7. Pressing the shutter release all the way down
stops recording.
Video recording ends automatically when the
memory card capacity is reached.
The following functions are available for video
recordings, although they cannot be changed
during recording:
_ Macro setting
_ Manual focus
_ Use of optical attachments
Notes:
Video recordings are always made with sound
recording. The corresponding symbol appears in
the data field and the monitor.
The (remaining) recording time shown in the data
field and the monitor is an approximate value.
At the beginning of video recordings (the first
image), the focus, exposure and focal length
settings are saved.
With other memory card types than that supplied
(i. e. a MultiMediaCard), video recordings may be
suddenly aborted.
Using automatic single image replay
(AUTO REVIEW)
If AUTO REVIEW is turned on, every picture is
shown in the monitor for approximately 2 s after it
has been taken. This provides a quick and easy
way for you to check whether the picture was
taken successfully or you need to repeat it.
Notes:
The
AUTO REVIEW function is always activated
for series exposures with or without sound record-
ing, single pictures with sound recording, and for
automatic exposure and focus series and recor-
ding in TIFF format.
The
AUTO REVIEW function is not available for
use in conjunction with video recordings.
For series exposures, and for automatic exposure
and focus bracketing modes,
AUTO REVIEW
always shows only the first picture.
Setting the function:
1. Set the Record/review selector (1.14) to single
or series exposures.
2. Press the
MENU button (1.27).
3. Press right on the direction pad (1.29) to open
the basic settings menu (
h SETUP).
4. Set the function o AUTO REVIEW by pressing
(2x) down on the direction pad.
5. Select OFF or ON by pressing left or right on
the direction pad.
The active function is marked in yellow.
6. Press the
MENU button to save your setting
and to exit the menu system.
Checking the last picture (REVIEW)
If the automatic single image replay review
function is set (
AUTO REVIEW), the last picture
taken will immediately appear in the monitor
(1.32) for around 2 s. However, you can also view
your pictures at any time.
Setting the function:
1. After taking a picture, press the review/
enlargement button (
VIEW/SET, 1.31).
The last picture taken is then shown in the
monitor for around 3s.