Operating Instructions

Detailed guide / Record mode / 130
Note:
This function is only available for as long as the
camera has not turned itself off automatically (see
p. 179).
2. If you the
VIEW/SET button again during
viewing of the enlarged picture, a 4x enlarged
trimmed area of the picture is shown. Pressing
the button again leads to a trimmed area
enlarged again to 8x. If the
VIEW/SET button
is pressed while viewing this enlargement, the
original monitor screen appears again.
3. The direction pad (1.29) can be used to select
any section of the picture at 8x enlargement.
To do this, press the direction (repeatedly) in
which you want to move the trimmed area.
If the edge of the picture is reached in one or
two directions, this is indicated by the fact that
the corresponding arrows go out.
Notes:
If you are using the exposure series function,
only the first picture in the last series is shown.
The viewing function is not available for video
recordings.
Likewise if another record or review mode has
been selected after taking the picture, or the
camera has been turned off, the viewing function
is not available.
Deleting the picture during viewing
While a picture is shown enlarged in the monitor
using this function, you can take this opportunity
to delete it if you wish to do so.
1. To do this, press the
MENU button (1.27) again.
2. Select
NO – to retain a picture – or YES – to
delete – by pressing up or down on the direc-
tion pad.
3. Finally, press the
VIEW/SET button. If you
previously selected
YES, the picture data is
deleted.
The original monitor screen appears again.
Warning:
Picture data is permanently deleted. You cannot
subsequently retrieve it.