Operating Instructions

4. Open the relevant sub-menu by pressing right
on the direction pad.)
5. Select the desired contrast by pressing left
and/or right on the direction pad.
The option currently set is marked in yellow.
6. Switch to the other two picture properties by
pressing down on the direction pad. They are
set as described in point 4.
The option currently set is marked in yellow.
7. Press the
MENU button twice to save your set-
ting and to exit the menu system.
The original monitor screen appears again.
Using lens attachments
Your photographic specialist will have lens attach-
ments, which – with the aid of an adapter – can
be used on the LEICA DIGILUX 1. This additional
equipment allows you to extend or reduce the lens
focal length for an even smaller or even larger
trimmed area.
Leica also offers a special adapter for use with
TELEVID spotting scopes (Code No. 42302),
which provides a simple method for taking photo-
graphs of the up to 60x enlarged image from the
spotting scope.
Standard E49 filters can also be used with a
special adapter (Code No. 18609). Leica offers a
corresponding UVA filter (Code No. 13 238) and a
universal polarizing filter that folds out for viewing
and setting (Code No. 13 356).
Notes:
Lens attachments can also be used for video
recordings.
If the camera is set up for the use of lens
attachments, the built-in flash unit is deactivated.
External distance measurement is also turned off.
The focussing process is therefore slower and the
shutter release delay is longer.
Please refer to the relevant manuals for more
details on lens attachments.
Setting the function:
1. Set the record/review selector (1.14) and the
exposure mode dial (1.15) to the desired
functions.
2. Press the
MENU button (1.27).
3. Select the # CONVERSION function in the
menu by pressing (10x) down on the direction
pad (1.29).
4. Select the desired function by pressing left or
right on the direction pad.
The option currently set is marked in yellow.
Detailed guide / Record mode / 153