Operating Instructions

Detailed guide / Review mode / 158
3. You can use the direction pad (1.29) to select
any trimming at any enlargement. To do this,
press the direction in which you want to move
the trimmed area.
If the edge of the picture is reached in one or
two directions, this is indicated by the fact that
the corresponding arrows go out.
If, after viewing the enlarged picture, you decide
that you do not want to use it, you can delete
immediately at this point.
4. Press the
MENU button (1.27).
5. Select
NO – to retain a picture – or YES –
to delete – by pressing up or down on the
direction pad.
6. Finally, press the
VIEW/SET button. If you
previously selected
YES, the picture data is
deleted.
Note:
Protected pictures must first of all be unlocked,
before they can be deleted. See the section
“Protecting pictures” on p.162 for details.
Warning:
Picture data is permanently deleted. You cannot
subsequently retrieve it.
Reviewing video recordings
Just like single pictures, video recordings can be
viewed on the monitor.
Notes:
Only video files in QuickTime Motion JPEG format
can be played back. Therefore, it may not be
possible to play back video files to other standards
or those recorded using other cameras.
Setting the function/Selecting pictures:
1. Set the Record/review selector (1.14) to
review
J.
The last picture taken is then shown.
All displays disappear from the data field and
PLAY appears instead.
2. Press left or right on the direction pad (1.29) to
open the desired video file. Holding it down
allows you to scroll quickly through the files. As
the files scroll through in an endless loop, you
can reach all recordings in either direction.
The first frame of the selected video recording
is then shown.