Operating Instructions

Detailed guide / Review mode / 160
Deleting single pictures
5. Open the corresponding sub-menu by pressing
right on the direction pad.)
6. To delete the picture, press the
VIEW/SET
button (1.31).
If a picture is deleted, the next one then appears
in the monitor.
Note:
While carrying out an operation, you can also
select the other pictures by pressing right and/or
left on the direction pad.
7. Press the
MENU button once to return to the
previous menu level or twice to exit the menu
system.
Deleting several pictures simultaneously
5. Select MULTI by pressing down and/or up on
the direction pad to delete up to 50 pictures
simultaneously.
The menu line is marked in yellow and the
arrow described above under point 4 appears,
along with a further arrow pointing upwards.
6. Open the corresponding sub-menu by pressing
right on the direction pad.
The picture and menu displays disappear
from the monitor; they are replaced by up to
6 pictures in miniature format, each with their
number, with the active picture being marked in
yellow.
7. Select each picture to be deleted individually by
pressing left and/or right on the direction pad.
The number of the active picture is always
shown in yellow.
8. Mark each picture to be deleted individually by
pressing up on the direction pad.
The
, symbol appears on the relevant picture,
or cancel the marking by pressing down on the
direction pad the
, symbol disappears.
9. Press the VIEW/SET button to delete the
selected pictures.
The pictures disappear, the monitor screen
goes grey and
PLEASE WAIT… appears for a
short time while the data is being deleted. The
next pictures then appear.