Operating Instructions

Detailed guide / Review mode / 163
3. Select the
M PROTECT function in the menu
by pressing (2x) down on the direction pad
(1.29).
4. Open the sub-menu by pressing right on the
direction pad.
The further steps are different depending on the
selected function.
Protecting single pictures/
Removing protection
5. Open the picture again by pressing right on the
direction pad.
The symbol
M PROTECT appears in the top
left of the monitor .
6. To protect the picture, press the
VIEW/SET
button.
The display in the monitor changes, with
M
UNPROTECT now appearing in the top left,
with the symbol for a protected picture
m
below it.
Note:
These displays also appear if a picture that is
already protected is opened.
To remove the protection, you also press the
VIEW/SET button.
The displays change back to those described in
point 5.
Note:
While carrying out this operation, you can also
select the other pictures by pressing right and/or
left on the direction pad.
7. Press the
MENU button once to return to the
previous menu level or twice to exit the menu
system.