Operating Instructions

Detailed guide / Review mode / 164
Protecting several pictures on the
memory card
5. Select MULTI by pressing down on the
direction pad to protect several pictures
on the memory card.
The menu line is marked in yellow and the
arrow described above under point 4 appears,
along with a further arrow pointing upwards.
6. Open the associated sub-menu by pressing
right on the direction pad.
7. Select each picture to be protected individually
by pressing left and/or right on the direction
pad.
The number of the active picture is always shown
in yellow.
8. Mark each picture to be protected individually
by pressing up on the direction pad.
The
m symbol appears on the relevant picture,
or cancel the marking by pressing down on the
direction pad
the
m symbol disappears.
9. Press the VIEW/SET button to protect the
selected pictures.
The small pictures and the displays in the
monitor disappear, the monitor screen goes
grey and
PLEASE WAIT… appears while the
settings are being saved. The last active picture
then appears on the whole field with the original
displays. For pictures marked accordingly, the
protection symbol
m also appears in the
center of the header.
Deleting all protection settings
5. Select CANCEL by pressing down and/or up
on the direction pad if you want to delete all
existing protection settings.
The menu line is marked in yellow and the left
and right arrows described above under point
4 appears, along with a further arrow pointing
upwards.
6. Open the associated sub-menu by pressing
right on the direction pad.
7. Press up or down on the direction pad to select
NO to retain or YES (marked with upwards
arrow and in yellow, if activated) to delete all
protection settings.