Operating Instructions

Detailed guide / Review mode / 165
8. Finally, press the
VIEW/SET button. If you
previously selected
YES, all protection settings
are deleted.
The 1st menu level appears again in the monitor.
9. Press the
MENU button to exit the menu
system.
Print order (DPOF) settings on the
memory card
As with traditional photography, you can have
prints of digital pictures produced by a photogra-
phic studio or do it yourself on the appropriate
machines, or print them yourself using compatible
printers.
With your LEICA DIGILUX 1 you can prepare this
kind of printing job in advance, by defining how
many of which pictures you want to order on the
memory card. This is done using the common
DPOF standard (
Digital Print Order Format).
The LEICA DIGILUX 1 also offers you the option of
marking single pictures, or several or all pictures
at the same time accordingly, as well as defining
individual print quantities of up to 99 units for
each marked picture.
Notes:
If the picture files are not compatible with the
DCF standard, it is not possible to make print
order settings on the memory card. This standard
specifies the file structure.
If print order settings with this camera include
pictures, which have already been defined as part
of an automatic review sequence (
SLIDE SHOW,
see p. 176) on other devices, these settings are
overwritten. The automatic review sequence then
contains only those pictures for which print order
settings exist.
Setting the functions:
1. Select the desired picture as described in the
section “Reviewing single pictures” on p.155
under points 1 and 2.
2. Press the
MENU button (1.27).
3. Select the v DPOF function in the menu by
pressing (3x) down on the direction pad (1.29).
4. Open the sub-menu by pressing right on the
direction pad.
The further steps are different depending on the
selected function.