Operating Instructions

Print order settings for one picture
5. Open the corresponding sub-menu by pressing
right on the direction pad.
Note:
As part of steps 5, 6 and 7, at any time you can
press right and/or left on the direction pad to
select other pictures to be marked.
6. Press the
VIEW/SET button (1.31) to mark the
picture shown as one for which you want to
make print order settings.
Notes:
If you only want a single copy of this picture, you
can proceed immediately with step 8.
Settings already made can be deleted at this point
by pressing the
VIEW/SET button again.
7. If you want more than one copy, set the number
by pressing down and/or up on the direction
pad, down for a lower number, up for a higher
number. Hold down the relevant direction, to
scroll quickly through the numbers.
Note:
The numbers in the display do not scroll in an
endless loop, i. e. from
1 you can only go
upwards and from
99 you can only go downwards.
8. Press the MENU button once to save your
setting and return to the previous menu level,
or twice to exit the menu system.
On the monitor, the symbol for the print order
setting including the number of copies entered
also appears in the header on the right next to
the symbol for review mode.
Deleting individual print order settings
Settings already made can be deleted at any time
by repeating steps 1-5 as described above and
pressing the
VIEW/SET button.
Detailed guide / Review mode / 166