Operating Instructions

Print order settings for several pictures
5. Select MULTI by pressing down and/or up on
the direction pad, if you want to mark up to 50
pictures simultaneously.
The menu line is marked in yellow and the
arrow described above under point 4 appears,
along with a further arrow pointing upwards.
6. Open the corresponding sub-menu by pressing
right on the direction pad.
7. Select each picture to be marked individually by
pressing left and/or right on the direction pad.
The number of the active picture is always
shown in yellow.
8. For each picture selected, individually set the
desired number of copies by pressing up
and/or down on the direction pad,
the
v symbol including the set quantity
appears on the relevant picture, or cancel the
setting by (repeatedly) pressing down on the
direction pad.
The
v symbol disappears. Hold down the
relevant direction, to scroll quickly through the
numbers.
9. Press the
VIEW/SET button to save all
settings.
The small pictures and the displays in the
monitor disappear, the monitor screen goes
grey and
PLEASE WAIT… appears while the
settings are being saved. The last active picture
then appears on the whole field with the original
displays. On the monitor, the symbol for the print
order setting including the number of copies
entered also appears in the header for marked
pictures, on the right next to the symbol for review
mode.
Deleting all print order settings
5. Select CANCEL by pressing down and/or up
on the direction pad if you want to delete all
existing DPOF markings.
The menu line is marked in yellow and the
arrow described above under point 4 appears,
along with a further arrow pointing upwards.
Note:
The flashing arrow pointing to the right only ap-
pears if print order settings exist. If there are
none, it is not possible to access the sub-menu
and the steps described below.
6. Open the associated sub-menu by pressing
right on the direction pad.
Detailed guide / Review mode / 167