Operating Instructions

Further functions
Adding sound to existing pictures
(AUDIO DUBBING)
With the LEICA DIGILUX 1, you can add up to 10s
of sound recording to each picture at a later date,
e. g. as commentary.
Notes:
Once recorded, a sound recording cannot be
deleted, only overwritten with a new recording
(see below from point 5 onwards).
Later sound recordings are not possible either
for pictures in TIFF format (see p. 148) or for
video recordings.
Setting the function:
1. Select the desired picture as described in the
section “Reviewing single pictures” on p.155 in
points 1 and 2.
Note:
Pictures which already have an existing sound
recording are identified on the monitor by the
corresponding symbol (3.6) in the header, and by
an additional 3rd line with:
PLAY AUDIO: SET to
indicate how the sound is played back.
2. Press the
MENU button (1.27).
3. Select the Ö AUDIO DUB function in the menu
by pressing (5x) down on the direction pad
(1.29).
4. Return to the picture by pressing right on the
direction pad.
Note:
While carrying out steps 4 and 5 you can also
select the other pictures using right and left on
the direction pad, so that they can also be given
sound.
The following two steps are only required if a
sound recording already exists for this picture.
Otherwise, you can continue as described in point
7 onwards.
5. Press the
VIEW/SET button (1.31).
6. Press up or down on the direction pad to select
NO or YES.
NO if you want to retain the existing sound
recording, i. e. you do not want a new recording.
YES if you want to overwrite the existing sound
recording with a new one (marked with
upwards arrow and in yellow, if activated).
Detailed guide / Review mode / 170