Operating Instructions

Detailed guide / Review mode / 176
Creating new folder numbers
The LEICA DIGILUX 1 writes the picture numbers
to the memory card in ascending order. Initially,
the corresponding files are all stored in one folder.
You can create a new folder at any time, which
you can use to store subsequent pictures, e. g. to
group them together more clearly.
Setting the function:
1. Set the Record/review selector (1.14) to single
or series exposures.
2. Press the
MENU button (1.27).
3. Press right on the direction pad to open the
default settings menu (
h SETUP).
4. Select the F NO. RESET function in the menu
by pressing (5x) down on the direction pad
(1.29).
5. Open the corresponding sub-menu by pressing
right on the direction pad.
6. Select
NO to retain the existing folder number
or
YES (marked with the upwards arrow and in
yellow if activated) for a new number by press-
ing up or down on the direction pad.
7. Finally, press the VIEW/SET button. If you
previously selected
YES, the new folder number
is set for the subsequent pictures.
The 1st menu level appears again in the
monitor.
8. Press the
MENU button to exit the menu
system.
The original monitor screen appears again.
Automatic playback of a series of pictures
(SLIDE SHOW)
With the LEICA DIGILUX 1 you can automatically
play back a sequence of pictures saved on the
memory card on the camera monitor or the
screen of a connected computer like a slide show.
You can also select how long each picture is
shown for and whether any sound recordings are
to be played back at the same time.
Notes:
Automatic playback is not available for video
recordings.
Setting the function:
1. Set the Record/review selector (1.14) to
review
J.
2. Press the MENU button (1.27).
3. Select the p SLIDE SHOW function in the
menu by pressing (4x) down on the direction
pad (1.29).