Operating Instructions

Detailed guide / Review mode / 177
4. Open the sub-menu by pressing right on the
direction pad.
5. Continue the settings from step 6 if all pictures
are to be shown.
However, if only the pictures with print order
settings are to be shown, select
DPOF by
pressing down on the direction pad. The other
settings are the same.
The menu line is marked in yellow and the left and
right arrows described above under point 4 appear,
along with a further arrow pointing upwards.
6. Open the relevant sub-menu by pressing right
on the direction pad.
The following three steps are only required if you
want to change the display time for the individual
pictures. Otherwise, you can start automatic
playback as described in point 13.
7. Press up or down on the direction pad to select
DURATION 3SEC .
The menu line is marked in yellow, in addition
arrows pointing upwards and downwards are
also displayed, along with two of the four avail-
able display times
1 SEC, 2 SEC, 3 SEC, 5 SEC
to the right. Depending on which of the times
can be seen, arrows pointing to the left and/or
right also appear.
8. Select the desired display time by pressing left
or right on the direction pad.
The selected time is marked in yellow.
9. Return to the SLIDE SHOW menu item by
pressing up on the direction pad.
The following three steps are only required if you
want to playback any sound recordings. Otherwise,
you can start automatic playback as described in
point 13.
10. Select
AUDIO ON by pressing down on the
direction pad.
The menu line is marked in yellow, in addition
an arrow pointing upwards is displayed, along
with
ON and OFF to the right. Depending on
whether playback of sound recordings is turned
on or off, an arrow pointing to the left or the
right also appears.
11. Select the desired function type by pressing
left or right on the direction pad.
The selected function type is marked in yellow.
12. Return to the
SLIDE SHOW menu item by
pressing up on the direction pad.