Operating Instructions

Detailed guide / Review mode / 179
2. Press right on the direction pad (1.29) to open
the default settings menu
h SETUP.
3. Select the ä BEEP function in the menu by
pressing (3x) down on the direction pad.
4. Press right or left on the direction pad to
select
Ä (loud acknowledge tones), - (quiet
acknowledge tones) or
_ (no acknowledge
tones).
The active function is marked in yellow.
5. Press the
MENU button to save your setting
and to exit the menu system.
Setting automatic switch off (POWER SAVE)
This function switches the camera to standby
mode after a certain length of time, which saves
power by deactivating the displays in the monitor
and data field, for example. You can choose
whether you want to activate this function and, if
so, after how long you want the camera to switch
to standby. In this way, you can tailor this function
to your own personal working methods and also
significantly extend the life of your battery charge.
Notes:
If you are running the camera directly from the
mains using the mains/charging unit, automatic
switch off is not available.
If automatic switch off is activated and the battery
needs to be charged, you should turn the camera
off at the main switch (1.25) before you connect
the mains/charging unit to the camera socket. If
you leave the camera turned on in this situation,
malfunctions are possible.
Setting the function:
1. Press the
MENU button (1.27). It makes no
difference whether you are in record or review
modes.
2. Press right on the direction pad (1.29) to open
the default settings menu
h SETUP.
3. Select the A POWER SAVE function in the
menu by pressing (4x) down on the direction
pad.
4. Select
2MIN, 5MIN, 10MIN or OFF by pressing
left or right on the direction pad.
The active setting is marked in yellow.
5. Press the
MENU button to save your setting
and to exit the menu system.