Operating Instructions

Detailed guide / Review mode / 180
Playback on a TV
The LEICA DIGILUX 1 allows you to view or present
your pictures on a TV, and therefore on a large
screen. The camera is connected to the TV via the
A/V lead supplied, after it has been set to the TV
standard applicable in your country – PAL or
NTSC.
The camera’s monitor screen (“Livecam”) can
also be reproduced on NTSC compatible TVs or
computer monitors.
Notes:
The (brief) automatic review of the pictures taken
in record modes is not possible on a TV.
Do not use any leads other than the one supplied.
If your TV has a scart socket rather than a cinch
socket, you will also need an appropriate adapter.
Please refer to the relevant manual for details of
the required TV settings.
Selecting the TV standard
1. Set the Record/review selector (1.14) to
review mode
J.
2. Press the MENU button (1.27).
3. Press right on the direction pad (1.29) to open
the default settings menu
h SETUP.
4. Set the function
l VIDEO OUT by pressing
(6x) down on the direction pad (1.29).
5. Select
NTSC or PAL by pressing right or left on
the direction pad.
The active setting is marked in yellow.
6. Press the
MENU button to save your setting
and to exit the menu system.
The original monitor screen appears again.
Connecting/Playing back pictures
1. Turn off the camera and the TV.
2. Plug the small individual strip plugs of the lead
into the camera’s “A/V OUT” socket (1.35) and
plug the cinch plugs into the relevant sockets
on the TV: the yellow plug in the video in socket,
the white one in the audio in socket.
3. Turn on the TV and switch to the AV channel.
4. Turn on the camera and set the Record/review
selector (1.14) to review
J.
The image set on the camera is then reproduced
on the TV.