Operation Manual

Rugby 410/420 DG Accessories24
Remote Notes Setting the shut-off timer – The remote is set from the factory to shut
off after two minutes of not being used.
To change this shut-off time, enter the remote programming screen (just
described) by pressing and holding the STAR button, then pressing the
POWER button.
When the Rugby select screen is shown, press and hold the
STAND-BY button for 1.5 seconds. The shut-off time will change
between 120, 60, or 30 seconds each time the button is held.
Backlighting – The LCD backlighting is normally off to conserve battery
power.
To backlight the display on the remote, press the power button a
second time after the remote has been turned on.
Remote reception – The remote is an RF (radio frequency)
device with an internal antenna. Always ensure that the remote is within
the “line of sight” of the Rugby.
If the remote loses communication, hold the remote at a different angle
to improve reception.