Operation Manual

Rugby 410/420 DG Safety Directions30
9 Safety Directions
9.1 General
The following directions should enable the person responsible for the
product, and the person who actually uses the equipment, to anticipate
and avoid operational hazards.
The person responsible for the product must ensure that all users under-
stand these directions and adhere to them.
9.2 Intended Use
Permitted use • The product casts a horizontal laser plane or a laser beam for the
purposes of alignment.
• The product can be set up on its own baseplate or on a tripod.
• The laser beam can be detected by means of a laser detector.
• Remote control of product.
• Data communication with external appliances.
Adverse use • Use of the product without instruction.
• Use outside of the intended limits.
• Disabling safety systems.
• Removal of hazard notices.
• Opening the product using tools, for example screwdriver, unless this
is specifically permitted for certain functions.
• Modification or conversion of the product.
• Use after misappropriation.
• Use of products with obviously recognizable damages or defects.
• Use with accessories from other manufacturers without the prior
explicit approval of Leica Geosystems.
• Inadequate safeguards at the construction site (e.g. when using on
or near roads).
• Deliberate dazzling of third parties.
• Controlling of machines, moving objects or similar monitoring appli-
cation without additional control and safety installations.

Warning Adverse use can lead to injury, malfunction, and material damage.
It is the task of the person responsible for the equipment to inform the
user about hazards and how to counteract them. The product is not to
be used until the user has been instructed how to work with it.