Operation Manual

Rugby 410/420 DG 37Safety Directions
Labeling Class 2
A = Laser Beam
9.8 Electromagnetic Compatibility (EMC)
Description The term Electromagnetic Compatibility" is taken to mean the capa-
bility of the product to function smoothly in an environment where
electromagnetic radiation and electrostatic discharges are present,
and without causing electromagnetic disturbances to other equip-
ment.

Warning Electromagnetic radiation can cause disturbances in other equipment.
Although the product meets the strict regulations and standards which
are in force in this respect, Leica Geosystems cannot completely
exclude the possibility that other equipment may be disturbed.

Caution There is a risk that disturbances may be caused in other equipment if
the product is used in conjunction with accessories from other manu-
facturers, for example field computers, personal computers, two-way
radios, non-standard cables or external batteries.
Precautions:
Use only the equipment and accessories recommended by Leica
Geosystems. When combined with the product, they meet the strict
requirements stipulated by the guidelines and standards. When using
computers and two-way radios, pay attention to the information
about electromagnetic compatibility provided by the manufacturer.

Caution Disturbances caused by electromagnetic radiation can result in error-
neous measurements.
LEICA GEOSYSTEMS AG
CH-9435 Heerbrugg Switzerland
Type-Serial No. 420- Manufactured 2008
Art. No. 766362 Made in Singapore
Power: 6 VDC = nominal 280 mA max.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This device contains a transmitter:
FCC ID: OUR-XBEEPRO
IC ID: 4214A-XBEEPRO
ERP: <100mW
Complies with 21 CFR 1040.10 and
1040.11 except for deviations
pursuant to Laser Notice No 50,
dated July 26, 2001.
Laser Radiation
Do not stare into beam
Class 2 Laser Product
according to IEC 60825-1
(2007 - 03)
Po 2.7mW
= 620 - 690mW