Operation Manual

Rugby 410/420 DG Operation6
3 Operation
3.1 Entering Grade
Direct Grade Entry
Grade Entry by
Digit
Grade Zero The grade in either axis can quickly be set to zero by pressing both the
Up and Down buttons simultaneously while in either grade entry mode.
When changing grade using the direct entry method, the counter will
always stop at zero. Release the button and press again to continue
counting beyond zero.
Grade Capability The Rugby 410/420 DG can have up to 15% grade simultaneously in both
axes, or up to 25% in one axis.
Grades above 15% in one axis require that the cross axis grade be ±1%
or lower. In this situation, if attempting to enter grades greater than 1%
or 15%, a notice will appear on the screen when the button is pressed.
Press POWER to turn the Rugby on.
Press X/Y once to enter X-axis grade. Press X/Y again to enter
Y-axis grade.The display will show the grade entry screens.
Use the UP or DOWN buttons to set the desired grade.
Press X/Y to exit.
While in the grade entry screens, press the STAR button and a
cursor will appear on the +/- sign.
Press the STAR button to move the cursor to the right.
Press the UP or DOWN buttons to change the sign or the digit
that is highlighted.
Press X/Y to exit.