Operation Manual

- 109 -
Advanced (Recording pictures)
• Refer to P150 for the [MOTION PICTURE] Mode menu.
• The flash setting is fixed to [Œ].
• Refer to P230 for information about the available recording time.
• The available recording time displayed on the screen may not decrease regularly.
• Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
• The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
• The screen may be blacked out momentarily, or the camera may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
• When operating the zoom in recording motion pictures, it may take time to come into focus.
• If the Extended Optical Zoom was used before pressing the motion picture button, those
settings will be cleared, so the focus range will change dramatically.
• Even if the aspect ratio setting is the same in still and motion pictures,
the angle of view may change at the start of the motion picture
recording. When [ REC AREA] (P33) is set to [ON], angle of view
during motion picture recording is displayed.
• [STABILIZER] is fixed to [MODE1] in recording motion pictures.
• In recording motion pictures, the following functions cannot be used.
– Direction Detection function
– Extended Optical Zoom
– [FACE RECOG.]
• It is recommended to use a fully charged battery when recording motion pictures.
A Example
image:
When [REC MODE] is set to [AVCHD(1080i)] and the
[ASPECT RATIO] is set to [W].
B : This section is not recorded in motion pictures.