Operation Manual

- 11 -
Before Use
Rotating the LCD monitor
At the time when this camera is purchased, the LCD monitor is stowed in the camera body.
Bring out the LCD monitor as shown below.
1 Open the LCD monitor. (Maximum 180o)
2 It can be rotated 180o forwards.
3 Return the monitor to its original position.
Rotation range of the LCD monitor
4 Maximum 180o
5 180o
•
It can be rotated 180o forwards.
6 90o
•
It can only be rotated 90o towards you.
Note
•
Only rotate the LCD monitor after opening it wide enough, and be
careful not to use excessive force as it may be damaged.
• Be careful as the camera may get scratched if you rotate the LCD
monitor without opening the LCD monitor fully.
• Check that the terminal door is closed when rotating the LCD
monitor. The terminal door may get damaged or LCD monitor may
get scratched if you rotate the LCD monitor with the terminal door
opened.
• When holding the edge of the LCD monitor, there may be some
distortion, however this is not a malfunction. Moreover, this has no effect on the taken pictures
or playback.
• When not using the LCD monitor it is recommended that you close it with the screen facing
inwards to prevent dirt and scratches.
• Be careful as the rotation sound will be recorded when the LCD monitor is rotated during
motion picture recording.
∫ Horizontal opening direction ∫ Vertical rotating direction