Operation Manual

Advanced (Recording pictures)
- 144 -
For details on [REC] Mode menu settings, refer to P28.
Type of optical measurement to measure brightness can be changed.
Applicable modes:
Note
•
When [C] is selected and [AF MODE] is set to [š], the camera will adjust the exposure to suit
the person’s face.
For details on [REC] Mode menu settings, refer to P28.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
•
[ ] is displayed when it is set to either [LOW], [STANDARD], or [HIGH].
• Even when the [SENSITIVITY] is set to [ISO100], [SENSITIVITY] may be set higher than
[ISO100] if the picture is taken with [I.EXPOSURE] set to valid.
• Compensation effect may not be achieved depending on the conditions.
• [ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
• [LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
• The setting is fixed to [OFF] when [QUALITY] is set to [ ].
[METERING MODE]
[C]: Multiple
This is the method in which the camera measures the most
suitable exposure by judging the allocation of brightness on the
whole screen automatically. Usually, we recommend using this
method.
[ ]: Center weighted
This method concentrates metering sensitivity on the subject in
the center of the screen while also registering the rest of the
frame.
[Ù]: Spot
This is the method to measure the subject in the spot metering
target A.
[I.EXPOSURE] (Intelligent exposure adjustment)