Operation Manual

Advanced (Recording pictures)
- 146 -
For details on [REC] Mode menu settings, refer to P28.
This mode allows enlarging subjects even more than with Optical Zoom, Extended Optical
Zoom, or Intelligent Zoom.
Applicable modes:
[OFF]/[ON]
Note
•
Refer to P57 for details.
• If camera shake is a problem during zooming, it is recommended that [STABILIZER] be set to
[AUTO] or [MODE 1].
For details on [REC] Mode menu settings, refer to P28.
Using one of these modes, camera shake is detected and automatically compensated,
resulting in sharper pictures.
Applicable modes:
¢ [MODE1] will be selected during Motion Picture Recording.
Note
•
The Stabilizer Function may not be effective in the following cases.
– When there is a lot of camera shake.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take pictures indoors or in dark places.
• Always try to hold the camera as steady as possible, especially when you press the shutter
button.
• Only [OFF] or [MODE1] can be set in Creative Motion Picture Mode and [PANNING] in Scene
Mode.
• The setting is fixed to [OFF] in [STARRY SKY] and [HIGH SPEED MOVIE] in Scene Mode.
• Only [OFF] or [MODE1] can be set in Continuous Mode.
[DIGITAL ZOOM]
[STABILIZER]
[OFF]
[AUTO]
¢
: The optimum camera shake compensation is selected depending on the
condition.
[MODE1]: Camera shake is always compensated during [REC] Mode.
[MODE2]
¢
: Camera shake is compensated for when the shutter button is pressed.