Operation Manual
- 17 -
Preparation
∫ About the [CHARGE] indicator
•
When the [CHARGE] indicator flashes
– The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10 ºC to 30 ºC.
– The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
Connect the charger to the electrical
outlet.
• Disconnect the charger from the electrical socket
and detach the battery after charging is
completed.
• The AC cable does not fit entirely into the AC
input terminal. A gap will remain as shown on the
right.
plug-in type
Cable type
The [CHARGE]
indicator A turns on: Charging has started.
The [CHARGE]
indicator A turns off: Charging has been completed without any problem.
90°