Operation Manual

- 195 -

Connecting to other equipment

Printing the Pictures

If you connect the camera to a printer supporting PictBridge, you can select the pictures to

be printed out and instruct that printing be started on the camera’s LCD monitor.

•

Picture series will be displayed as a list, and not as a group.

• Some printers can print directly from the card removed from the camera. For details, refer to

the operating instructions of your printer.

Preparations:

Turn on the camera and the printer.

Remove the card before printing the pictures in the internal memory.

Perform the print quality and other settings at the printer before printing the pictures.

Connect the camera to a printer via the USB connection cable A

(supplied).

• When the camera is connected to the printer, the cable disconnect prohibit icon [å]

appears. Do not disconnect the USB cable while [å] is displayed.

Press 3/4 to select [PictBridge(PTP)], and then

press [MENU/SET].

A USB connection cable (supplied)

• Make sure the plug is aligned correctly and that it is inserted straight. (Otherwise the

connectors may be bent out of shape which will cause trouble.)

B Align the marks, and insert.

• Use a battery with sufficient battery power. If the remaining battery power becomes low while

the camera and the printer are connected, the alarm beeps. If this happens during printing, stop

printing at once. If not printing, disconnect the USB connection cable.

MIC

REMOTE

AV OUT/DIGITAL

USB MODE

SELECT SET

PLEASE SELECT

THE USB MODE

PictBridge(PTP)