Operation Manual
Preparation
- 38 -
¢1 When [VIDEO OUT] is set to [PAL]
¢2 When [VIDEO OUT] is set to [NTSC]
• Interlace method/progressive method
i= interlace scanning is scanning the screen with half of the effective scanning lines every
1/50
¢1
(1/60
¢2
) seconds, where p= progressive scanning is a high density image signal that is
scanning the screen with all the effective scanning lines every 1/50
¢1
(1/60
¢2
) seconds.
The [HDMI] terminal on the camera is compatible with high definition output [1080i]. It is
necessary to have a compatible TV to enjoy progressive and high definition images.
• If the images are not output on the TV when the setting is [AUTO], match with the image format
your TV can display, and select number of effective scanning lines. (Please read the operating
instructions for the TV.)
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P185 for details.
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P187 for details.
[HDMI MODE]
Set the format for HDMI output when playing back on a HDMI
compatible TV connected with the camera using the optional
HDMI mini cable.
[AUTO]:
The output resolution is automatically set based on the
information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for
output.
[720p]:
The progressive method with 720 available scan lines is used for
output.
[576p]
¢
1
/[480p]
¢
2
:
The progressive method with 576
¢
1
/480
¢
2
available scan lines is
used for output.
[HDTV Link]
Setup enabling the camera to be controlled by the remote control
units of HDTV-Link compatible equipment using the optional
HDMI mini cable.
[OFF]: Operation is performed with the buttons on the camera.
[ON]: Remote control operation of the HDTV Link compatible
equipment is enabled. (Not all operations are possible)
Button operation of the main unit will be limited.