INSTRUCTION MANUAL Headset with Bluetooth MODEL: BH-100 www.lenco.
HEADSET OVERVIEW ① Power switch ② Volume up & Next song ③ Volume down & Previous song ④ Microphone ⑤ LED Indicator Light ⑥ Charging socket OPENNING INSTRUCTIONS Charging the headset 1.Your headset uses a rechargeable built-in battery,make sure the headset is fully charged before using it for the first time. 2.Connect the USB cable to the charging socket,the headset can be charged. 3.During charging,the LED indicator light remains red,when charging completed,it turns to blue. Turning the headset on 1.
Pairing and Connecting the headset with a phone 1. Press and hold the power switch button about 7-9 seconds until you see the blue and red indicator light flashes rapidly and continually by turns,then release the button. 2. Activate the Bluetooth feature on your phone and search for the headset. 3. Select the headset (Lenco BH-100 ) from the list of devices found by your phone. 4.
TECHNISCHE DATEN ITEM SPECIFICATIONS Driver Unit 10 mm Impedance Frequency Response 16 Ohms 20 Hz to 20KHz S/N Rated Power 88±5dB 3 mW Max. output Power 30 mW Max.Input Power 30 mW Operating voltage range 3.0V-4.2V Battery Lithium 3.7V, 100mAh Bluetooth-Version Bluetooth v4.0 Mic Sensitivity -42 ±3dB Operating range up to 33 feet(10 meters) Standby time up to 160hours Talk/Play time about 4 hours Charging time 1.
The declaration of conformity may https://lencosupport.zendesk.com/forums/22413161-CE-Documents be consulted at Service and support For information: www.lenco.com Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly.