BTT-1 SPEAKERTOWER WITH BLUETOOTH™, FM RADIO AND USB SLOT User manual www.lenco.eu V1.
Table of content What is in the box? ..................................................................................................... 3 Mounting the base ...................................................................................................... 4 Getting started............................................................................................................ 4 Where to install .......................................................................................................
Dear customer, Thank you for buying this Lenco product. Quality and usability is our top priority. In order to let you fully enjoy this device, we have manufactured this product using high quality standards, materials, components, and care. Please read all safety instructions and national restrictions, before you use this device. Note: This user manual was printed prior to the development of this product.
Mounting the base Getting started Where to install Keep the device out of direct sunlight. When the device is not in use, place it on a sturdy platform of which the surface should be flat and steady, so the device cannot fall. Make sure the device is stored in such a manner that no object can fall on it, as pressure will damage or break the device. Prevent insertion of small objects into the ventilation slots, or openings in the cabinet at all time.
Exploring the device 1. PREVIOUS BUTTON 2. STOP BUTTON 3. SOURCE BUTTON 4. FAST REWIND BUTTON 5. FAST FORWARD BUTTON 6. VOLUME +/- BUTTON 7. DISPLAY SCREEN 8. NEXT BUTTON 9. PLAY/PAUSE BUTTON 10. STANDBY BUTTON 11. INDICATOR LIGHT 12. REMOTE CONTROL SENSOR 13. USB PORT 14. POWER SUPPLY INPUT 15.
Connections Before connecting acoustic equipment, pay attention to the picture below. Each connection must be safe and firm. Disconnect power cable until you have finished all the connections. You can connect audio source device such as MP3, telephone and others.
Basic operation PREPARATION 1) Before the unit is turned on, please check if all the connections are right and safe. Then connect the main power. 2) Press the POWER ON/OFF button on the back panel to turn on the main power. 3) Press the STANDBY button on the remote control (or front panel) to exit the standby mode. STATE INDICTION OF DISPLAY SCREEN 1) In radio status, show the received frequency and mono/stereo. 2) In Audio-input show the signal input and main volume status.
NUMBER BUTTONS In Radio status, press the NUMBER buttons to input the number of the required frequency or band. For more information, see RADIO OPERATION. PLAY/PAUSE BUTTON In play status, press the PLAY/PAUSE button to pause, press this button again to continue the playing. Note: This button is unavailable in Audio Input mode. Stop button In play status, press the STOP button, the player will stop playing; Press the PLAY/PAUSE button to resume playing mode.
To connect another device, first, disconnect the original paired device. Then follow the above steps to pair the BTT-1 with another device. NOTE: If the function cannot be controlled normally, press the Power ON/OFF button on the rear panel to turn off the speaker, then turn on it. Radio operation 1. Enter FM Function In the turn-on or playing status, press the FM button on the remote control to enter FM mode. 2.
Troubleshooting Probleem The device doesn’t turn on No sound The remote control does not function The unit does not respond Oplossing Check if the power cable is connected correctly? Is the main power switch turned on? Did you selected the correct source? (Bluetooth®, FM of AUX) Did you set the external audio source correctly? Is the Bluetooth® device paired? Press mute. Press volume +.
Specifications Power supply Internal Input AC ~ 100-240V, 50/60Hz Standby <1W Operation 60 Watt Temperature -10~+35°C Humidity 5%~90% Power consumption Operating conditions Speakers 2x 11W RMS @ 10% THD Subwoofer 23 W RMS @ 10% THD Output power Output Connections Display Frequency range ±1,5dB 20Hz~20kHz S/N >80dB @ 1kHz THD + Noise ≤-60dB @ 1kHz L/R Channel output Stereo Equalizer No AUX in 3,5mm Display color Red Information LED color in standby mode Red Information LED
Safety instructions IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE. CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO PREVENT AN ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER SCREWS. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REQUEST A QUALIFIED SERVICE PERSON TO PERFORM SERVICING. This symbol indicates that there are important operating maintenance instructions in the user manual accompanying this device.
Safety instructions - continued This device is produced according to all current safety regulations. The following safety tips should safeguard users against careless use and dangers involved with such use. Although this device is manufactured with the utmost care, and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances.
Declaration of Conformity Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Disclaimer Some content and services accessible through this device belong to third parties and are protected by copyright, patent-, trademark- and/or other intellectual property laws. Such content and services are solely provided for your personal and non-commercial use.
Service and support For questions about the software please visit http://audacity.sourceforge.net For information and support about the hardware: www.lenco.eu Lenco helpdesk: Germany The Netherlands Belgium France 0900-1520530 0900-23553626 02-6200115 0170480005 (Local charges) (Local charges + 1ct P/min) (Local charges) (Local charges) The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM. In case your device needs repair our helpdesk will redirect you to your local dealer.
End of life This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries.